The WH BC fixed jaw super clamp is fitted with a 'gussett' in both jaws maximising contact between the beam and clamp thus increasing the grip. A shackle is fitted to the bottom allowing an easy connection of the hoist to be attached. This fixed jaw super clamp can be used to an angle of 45° to the vertical. When the angle is moved away from the vertical the working load limit of the beam clamp needs to be reduced. Please refer to the table opposite - reduction in working load limits when side loads are applied.
- Marking: According to standard
- Standard:
EN 13155
AS 4991 - Note: Clamp model WH BC (027.200) is not suitable for any side loading as it is of lightweight design.
- Warning: All clamps must be correctly applied to the beam by a competent person and fully hand tightened. If in doubt, contact the manufacturer for their recommendations.
